|
|
|
Printex (HongKong) Limited
|
|
| |
Printex M4 for Disp. / Reac.
|
|
|
|
Textile Printing Thickener---Printex® M4
---Printex® M4 is a medium viscous, filtered technical Sodium Alginate based Textile Printing
Thickener designed applying for printing with Reactive Dyes on cotton, and also for printing
with Disperse / Reactive dyes on Polyester / Blends.
---Printex® M4 is suitable for Flat Bed Printing and Rotary Screen Printing.
Properties
---High colour yield and penetration
---good sharpness and levelness
---stable viscosity under high shear conditions
---excellent eash-off properties
Product
---Appearance Yellowish to light brown powder
---Filter grade High purity
---PH 6.5---7.5
---Moisture 12% max
---Solubility Cold water
---Viscosity 400-450 (1% solution)
Measured with Brookfield RVT,
Application
---Printex® M4 can be combined in any retio with other Thickeners such as Texprint C6, CMC,
some kinds of Gum and Synthetic Polymers etc.It has good compatibility with other Thickeners.
---Stock Thickening Preparation
Printex® M4 4Kg
Water 96Kg
Stock Thickening 100Kgs
---Printex® M4 is added to water while stirring with high speed stirrer,which takes about 1?2 minutes
until the viscosity increases.
---The stock should be stand for another few hours to permit complete swelling,but not overnight.
---The finally, short stirring the stock thickening is ready for use.
Remark: Printex® M4 dissolves easy in cold water, if dissolved in water with hardness of 12.5E,
additional of 1-2g Polyphosphate per Kg stock solution is recommended,but not EDTA. The srock solution should be preserved with suitable Preserving Agent if stored before use,(Formaldehyde 1-2g/Kg)
Packing
---25Kgs plstic reinforced paper or woven bag,PE-lined of net each.
Storage
---Should be stored in a dry and cool place to maintain best product performance.
Company: PRINTEX (HONGKONG) LIMITED
Add:No.2,Xinglin St.,Dalian,China 116001.
Tel: +86- 411- 82590651 / 82593819 Fax:+86-411-82556086
|
|
| |
|
|
|