Home > Buy Now > Printex (HongKong) Limited > Printex L10 for Disp. / Reac.
 


Printex (HongKong) Limited
 
icon Printex MR6 for Disperse Printing
icon Detergent---CMC,CMS
icon Dextrin(Yellowidh & White)
icon Pharmaceuticals---Mannitol BP98
icon Sodium Alginate LV, MV, HV
icon Sodium Alginate (Printex L10 L20 M4 H4 H5 H6 H7 RP)
icon Textile Printing Thickener---Sodium Alginate
icon Texprint C6 for Disperse
icon Printex L10 for Disp. / Reac.
icon Printex L20 for Disp. / Reac.
icon Printex M4 for Disp. / Reac.
icon Printex H5 for Disp. /Reac.
icon Printex H6 for Disp. / Reac.
icon Printex RP for Rotary Printing
icon Printex CRD40 for Reac.

line

icon Company Profile

line

 
Contact us
Printex (HongKong) Limited
[China]
Address:
Rm508 (East),No.2, Xinglin St., Dalian Liaoning 116001 China
Phone:
86-411-82590651
Contact name:
He Rongchun , Director
Inquire now










Printex (HongKong) Limited



 
Printex L10 for Disp. / Reac.

Textile Printing Thickener---Printex® L10

---Printex® L10 is low viscous, filtered technical Sodium Alginate based Textile Printing Thickener designed
  applying for printing with Reactive Dyes on cotton, and also for printing with Disperse / Reactive
  dyes on Polyester / Blends.
---Printex® L10 is suitable for Rotary and Roller Printing.

Properties
---High colour yield and penetration
---good sharpness and levelness
---stable viscosity under high shear conditions
---excellent eash-off properties

Product
---Appearance                Yellowish to light brown powder
---Filter grade                 High purity          
---PH                              6.5---7.5
---Moisture                   12% max
---Solubility                   Cold water
---Viscosity                   90-110CPS  (1% solution)
Measured with Brookfield RVT, at 25 C, Spindle No.2, 20 RPM.

Application
---Printex® L10 can be combined in any retio with other Thickeners such as Texprint C6, CMC,
  some kinds of Gum and Synthetic Polymers etc.It has good compatibility with other Thickeners.

---Stock Thickening Preparation
   Printex® L10            8Kg
   Water                  92Kg
   Stock Thickening       100Kgs

---Printex® L10 is added to water while stirring with high speed stirrer,which takes about 1?2 minutes
  until the viscosity increases.

---The stock should be stand for another few hours to permit complete swelling,but not overnight.
---The finally, short stirring the stock thickening is ready for use.

Remark: Printex® L10 dissolves easy in cold water, if dissolved in water with hardness of 12.5E, additional
        of 1-2g Polyphosphate per Kg stock solution is recommended,but not EDTA. The srock solution
        should be preserved with suitable Preserving Agent if stored before use,(Formaldehyde 1-2g/Kg)

Packing
---25Kgs plstic reinforced paper or woven bag,PE-lined of net each.

Storage
---Should be stored in a dry and cool place to maintain best product performance.

        Company: PRINTEX (HONGKONG) LIMITED  Dalian Branch
        Add:No.2,Xinglin St.,Dalian,China 116001.
        Tel: +86- 411- 82590651   /   82593819          Fax:+86-411-82556086
    
Total 0 Product